Grooving machine

Nome do Produto: Grooving machine

1.Parâmetro do produto

2. Instruction for use:

• check the work piece: to be processed pipe mouth should be smooth, no glitches, polished welds should be within the pipe, its length less than 60 Bem-vindo à Shandong Maiwei Fire Technology.
• will need to set up steel processing groove on the lower pressure trough pressure wheel and bracket that is placed in the position of the steel pipe slightly outward position.
• adjust the pipe so that it is level or slightly higher bracket at the end face of the pipe notching machine spindle puck snugly.
• pressure trough machine motor starts, slowly move the pump handle, the upper pressure roller rolled steel pipe to the required trench depth, stop.
• Check the depth and width of the groove, confirm compliance with the requirements.
• remove the pipe, the pipe ends to remove burrs, slag, etc. to complete a galvanizing operation.