Grooving machine to be processed pipe mouth should be smooth,

Macchina per scanalare

nome del prodotto: Macchina per scanalare

1.Product Parameter

Product Type	Working scope (mm)	Arbor Rotating Speed (rpm)	Rated Voltage (V)	Motor Power (kw)	Entire Weight (kg)	Dimensions (LxWxH)
GC-12A	76-325 Wall thickness≤6mm	15	380	1.5kw	248kg	950x520x980
GC-12B	76-273 Wall thickness≤6mm	15	380	1.1kw	175kg	950x360x880
GC-12D	42-219 Wall thickness≤5mm	18	380	0.75kw	43kg	800x360x450

2. Instruction for use:

check the work piece: to be processed pipe mouth should be smooth, no glitches, polished welds should be within the pipe, its length less than 60 mm.
will need to set up steel processing groove on the lower pressure trough pressure wheel and bracket that is placed in the position of the steel pipe slightly outward position.
adjust the pipe so that it is level or slightly higher bracket at the end face of the pipe notching machine spindle puck snugly.
pressure trough machine motor starts, slowly move the pump handle, the upper pressure roller rolled steel pipe to the required trench depth, stop.
Check the depth and width of the groove, confirm compliance with the requirements.
remove the pipe, the pipe ends to remove burrs, slag, etc. to complete a galvanizing operation.