La bomba contra incendios es una herramienta de extinción de incendios relativamente profesional., que juega un papel vital en nuestras vidas y está relacionado con la seguridad de la vida de muchas personas. Se pueden ver en casi todos los rincones de la oficina o comunidad de la ciudad.. Muchas personas piensan que las herramientas de lucha contra incendios deberían ser profesionales, Pero de hecho, En muchas situaciones de emergencia, Podemos usarlos nosotros mismos.
Echemos un vistazo, a qué se debe prestar atención antes de comenzar:
1. Check the status of the process valve switch. Sometimes, due to long-term use or failure, the valve switch will not open when needed, which poses a big safety hazard. It is very important to check the switch status of the corresponding return valve and whether it can meet the requirements. In this process, we need to understand that the return valve should be fully open, while the valve group valve is in a tightly closed state. In addition, professional knowledge also includes that when trying out the foam outlet, you need to close several foam tank valves at the inlet.
If you don’t understand, you can ask professionals to explain, or you can search and query on the Internet, and you will gradually understand them. In addition, it should be noted that opening one of the return valves can start the pump. And after all of these are completed, remember to restore all valves to their original state. Once a real emergency situation arises or a fire pump is needed for an exercise, the corresponding demand valve in the valve block should be opened and the return valve should be in a tightly closed state.
2. The handle state of the clutch should be in the “closed” position for removal of silt. We must pay attention to these small details.
3. Turn on the bleed switch and close the valve after resetting the float. Before the fire pump is started, it is mainly to check some small aspects.
